NickServ ChanServ MemoServ ReportServ BotServ
HostServ
LoveServ
MoraleServ
OperServ
Modes
Watcher
virus/drone
NEDERLANDS
index


ChanServ

HELP

ChanServ allows you to register and control various aspects of channels. ChanServ can often prevent malicious users from "taking over" channels by limiting who is allowed channel operator priviliges. Available commands are listed below; to use them, type /msg ChanServ command. For more information on a specific command, type /msg ChanServ HELP command.

REGISTER Register a channel
IDENTIFY Identify yourself with your password
SET Set channel options and information
AOP Modify the list of AOP users
SOP Modify the list of SOP users
ACCESS Modify the list of privileged users
LEVELS Redefine the meanings of access levels
AKICK Maintain the AutoKick list
DROP Cancel the registration of a channel
SENDPASS Help retrieve lost passwords

Other commands: BAN, CLEAR, DEOP, DEVOICE, GETKEY, INFO, INVITE, KICK, LIST, LOGOUT, OP, TOPIC, UNBAN, VOICE, VOP

CHAT4ALL extra

These commands are also available on this network: DEHALFOP DEOWNER DEPROTECT HALFOP HOP OWNER PROTECT

EXPIRES

Note that any channel which is not used for 50 days (i.e. which no user on the channel's access list enters for that period of time) will be automatically dropped.

REGISTER

Syntax: /msg ChanServ REGISTER #channel password description

Registers a channel in the ChanServ database. In order to use this command, you must first be a channel operator on the channel you're trying to register. The password is used with the IDENTIFY command to allow others to make changes to the channel settings at a later time. The last parameter, which must be included, is a general description of the channel's purpose.

When you register a channel, you are recorded as the "founder" of the channel. The channel founder is allowed to change all of the channel settings for the channel; ChanServ will also automatically give the founder channel-operator privileges when s/he enters the channel. See the ACCESS command (/msg ChanServ HELP ACCESS) for information on giving a subset of these privileges to other channel users.

NOTICE: In order to register a channel, you must have first registered your nickname. If you haven't, /msg NickServ HELP for information on how to do so.

IDENTIFY

Syntax: /msg ChanServ IDENTIFY #channel password

Authenticates you to ChanServ as the founder of the given channel. Many commands require you to use this command before using them. The password should be the same one you sent with the REGISTER command.

LOGOUT

Syntax: /msg ChanServ LOGOUT #channel nickname

This command will log the selected nickname out meaning they would have to reidentify themselves to regain their access.

If you are the founder of the channel, you can log out anybody, else you can only log out yourself.

DROP

Syntax: /msg ChanServ DROP [#channel]

Unregisters the named channel. Can only be used b channel founder who must use the IDENTIFY command first.

SET

Syntax: /msg ChanServ SET #channel option parameters

Allows the channel founder to set various channel options and other information.
Available options:

FOUNDER Set the founder of a channel
SUCCESSOR Set the successor for a channel
PASSWORD Set the founder password
DESC Set the channel description
URL Associate a URL with the channel
EMAIL Associate an E-mail address with the channel
ENTRYMSG Set a message to be sent to users when they enter the channel
BANTYPE Set how Services make bans on the channel
MLOCK Lock channel modes on or off
KEEPTOPIC Retain topic when channel is not in use
OPNOTICE Send a notice when OP/DEOP commands are used
PEACE Regulate the use of critical commands
PRIVATE Hide channel from LIST command
RESTRICTED Restrict access to the channel
SECURE Activate ChanServ security features
SECUREOPS Strengere controle van de channel op-status
SECUREFOUNDER Stricter control of channel founder status
SIGNKICK Sign kicks that are done with KICK command
TOPICLOCK Topic can only be changed with TOPIC
XOP Toggle the user privilege system

Type /msg ChanServ HELP SET option for more information on a particular option.

* SET FOUNDER

Syntax: /msg ChanServ SET #channel FOUNDER nickname

Changes the founder of a channel. The new nickname must be a registered one.

* SET SUCCESSOR

Syntax: /msg ChanServ SET #channel SUCCESSOR nickname

Changes the successor of a channel. If the founder's nickname expires or is dropped while the channel is still registered, the successor will become the new founder of the channel. However, if the successor already has too many channels registered (5), the channel will be dropped instead, just as if no successor had been set. The new nickname must be a registered one

* SET PASSWORD

Syntax: /msg ChanServ SET #channel PASSWORD password

Sets the password used to identify as the founder of the channel.

* SET DESC

Syntax: /msg ChanServ SET #channel DESC description

Sets the description for the channel, which shows up with the LIST and INFO commands.

* SET URL

Syntax: /msg ChanServ SET #channel URL url

Associates the given URL with the channel. This URL will be displayed whenever someone requests information on the channel with the INFO command. If no parameter is given, deletes any current URL for the channel.

* SET EMAIL

Syntax: /msg ChanServ SET #channel EMAIL address

Associates the given E-mail address with the channel. This address will be displayed whenever someone requests information on the channel with the INFO command. If no parameter is given, deletes any current E-mail address for the channel.

* SET ENTRYMSG

Syntax: /msg ChanServ SET #channel ENTRYMSG message

Sets the message which will be sent via /notice to users when they enter the channel. If no parameter is given, causes no message to be sent upon entering the channel.

* SET BANTYPE

Syntax: /msg ChanServ SET #channel BANTYPE bantype

Sets the ban type that will be used by Services whenever they need to ban someone from your channel.

Bantype is a number between 0 and 3 that means:

0: ban in the form *!user@host

1: ban in the form *!*user@host

2: ban in the form *!*@host

3: ban in the form *!*user@*.domain

* SET KEEPTOPIC

Syntax: /msg ChanServ SET #channel KEEPTOPIC {ON | OFF}

Enables or disables the topic retention option for a channel. When topic retention is set, the topic for the channel will be remembered by ChanServ even after the last user leaves the channel, and will be restored the next time the channel is created.

* SET TOPICLOCK

Syntax: /msg ChanServ SET #channel TOPICLOCK {ON | OFF}

Enables or disables the topic lock option for a channel. Whe topic lock is set, ChanServ will not allow the channel topic to be changed except via the TOPIC command.

* SET MLOCK

Syntax: /msg ChanServ SET #channel MLOCK modes

Sets the mode-lock parameter for the channel. ChanServ allows you to define certain channel modes to be always on, off or free to be either on or off.

The modes parameter is constructed exactly the same way as a /MODE command; that is, modes followed by a + are locked on, and modes followed by a - are locked off. Note, however, that unlike the /MODE command, each use of SET MLOCK will remove all modes previously locked before setting the new!

Warning: If you set a mode-locked key, as in the second example below, you should also set the RESTRICTED option for the channel (see /msg ChanServ HELP SET RESTRICTED), or anyone entering the channel when it is empty will be able to see the key!

Examples:

/msg ChanServ SET #channel MLOCK +nt-iklps
Forces modes n and t on, and modes i, k, l, p, and s off.
Mode m is left free to be either on or off.

/msg ChanServ SET #channel MLOCK +knst-ilmp my-key
Forces modes k, n, s, and t on, and modes i, l, m, and p off.
Also forces the channel key to be "my-key".

/msg ChanServ SET #channel MLOCK +
Removes the mode lock; all channel modes are free to be either on or off.

* SET PEACE

Syntax: /msg ChanServ SET #channel PEACE {ON | OFF}

Enables or disables the PEACE option for a channel. When PEACE is set, an user won't be able to kick, ban or remove a channel status of an user that has a level superior or equal to his via ChanServ commands.

* SET PRIVATE

Syntax: /msg ChanServ SET #channel PRIVATE {ON | OFF}

Enables or disables the private option for a channel. When private is set, a /msg ChanServ LIST will not include the channel in any lists.

* SET RESTRICTED

Syntax: /msg ChanServ SET #channel RESTRICTED {ON | OFF}

Enables or disables the restricted access option for a channel. When restricted access is set, users who would normally be disallowed from having channel operator privileges (users with negative access levels and, if secure ops is set, users not on the access list) will instead be kicked and banned from the channel.

* SET SECURE

Syntax: /msg ChanServ SET #channel SECURE {ON | OFF}

Enables or disables ChanServ's security features for a channel. When SECURE is set, only users who have registered their nicknames with NickServ and IDENTIFY'd with their password will be given access to the channel as controlled by the access list.

* SET SECUREOPS

Syntax: /msg ChanServ SET #channel SECUREOPS {ON | OFF}

Enables or disables the secure ops option for a channel. When secure ops is set, users who are not on the userlist will not be allowed chanop status.

* SET SECUREFOUNDER

Syntax: /msg ChanServ SET #channel SECUREFOUNDER {ON | OFF}

Enables or disables the secure founder option for a channel. When secure founder is set, only the real founder will be able to drop the channel, change its password, its founder and its successor, and not those who are IDENTIFY'd with ChanServ.

* SET SIGNKICK

Syntax: /msg ChanServ SET #channel SIGNKICK {ON | LEVEL | OFF}

Enables or disables signed kicks for a channel. When SIGNKICK is set, kicks issued with ChanServ KICK command will have the nick that used the command in their reason.

If you use LEVEL, those who have a level that is superior or equal to the SIGNKICK level on the channel won't have their kicks signed. See /msg ChanServ HELP LEVELS for more information.

* SET XOP

Syntax: /msg ChanServ SET #channel XOP {ON | OFF}

Enables or disables the XOP lists system for a channel. When XOP is set, you have to use the AOP/SOP/VOP commands in order to give channel privileges to users, else you have to use the ACCESS command.

Technical Note: when you switch from access list to XOP lists system, your level definitions and user levels will be changed, so you won't find the same values if you switch back to access system!

You should also check that your users are in the good XOP after the switch from access to XOP lists, because the guess is not always perfect... in fact, it is not recommended to use the XOP lists if you changed level definitions with the LEVELS command.

Switching from XOP lists system to access list system causes no problem though.

* SET OPNOTICE

Syntax: /msg ChanServ SET #channel OPNOTICE {ON | OFF}

Enables or disables the op-notice option for a channel. When op-notice is set, ChanServ will send a notice to the channel whenever the OP or DEOP commands are used for a user in the channel.

AOP

Syntax: /msg ChanServ AOP #channel ADD nickname
Syntax: /msg ChanServ AOP #channel DEL {nickname | entry-num | list}
Syntax: /msg ChanServ AOP #channel LIST [mask | list]
Syntax: /msg ChanServ AOP #channel CLEAR

Maintains the AOP (AutoOP) list for a channel. The AOP list gives users the right to be auto-opped on your channel, to unban or invite themselves if needed, to have their greet message showed on join, and so on.

The AOP ADD command adds the given nickname to the AOP list.

The AOP DEL command removes the given nick from the AOP list. If a list of entry numbers is given, those entries are deleted. (See the example for LIST below.)

The AOP LIST command displays the AOP list. If a wildcard mask is given, only those entries matching the mask are displayed. If a list of entry numbers is given, only those entries are shown; for example

/msg ChanServ AOP #channel LIST 2-5,7-9
Lists AOP entries numbered 2 through 5 and 7 through 9.

The AOP CLEAR command clears all entries of the AOP list.

The AOP ADD and AOP DEL commands are limited to SOPs or above, while the AOP CLEAR command can only be used by the channel founder. However, any user on the AOP list may use the AOP LIST command.

This command may have been disabled for your channel, and in that case you need to use the access list. See /msg ChanServ HELP ACCESS for information about the access list, and /msg ChanServ HELP SET XOP to know how to toggle between the access list and XOP list systems.

HOP

Syntax: /msg ChanServ HOP #channel ADD nickname
Syntax: /msg ChanServ HOP #channel DEL {nickname | entry-num | list}
Syntax: /msg ChanServ HOP #channel LIST [mask | list]
Syntax: /msg ChanServ HOP #channel CLEAR

Maintains the HOP (HalfOP) list for a channel. The HOP list gives users the right to be auto-halfopped on your channel.

The HOP ADD command adds the given nickname to the HOP list.

The HOP DEL command removes the given nick from the HOP list. If a list of entry numbers is given, those entries are deleted. (See the example for LIST below.)

The HOP LIST command displays the HOP list. If a wildcard mask is given, only those entries matching the mask are displayed. If a list of entry numbers is given, only those entries are shown; for example:

/msg ChanServ HOP #channel LIST 2-5,7-9
Lists HOP entries numbered 2 through 5 and 7 through 9.

The HOP CLEAR command clears all entries of the HOP list.

The HOP ADD, HOP DEL and HOP LIST commands are limited to AOPs or above, while the HOP CLEAR command can only be used by the channel founder.

This command may have been disabled for your channel, and in that case you need to use the access list. See /msg ChanServ HELP ACCESS for information about the access list, and /msg ChanServ HELP SET XOP to know how to toggle between the access list and XOP list systems.t

SOP

Syntax: /msg ChanServ SOP #channel ADD nickname
Syntax: /msg ChanServ SOP #channel DEL {nickname | entry-num | list}
Syntax: /msg ChanServ SOP #channel LIST [mask | list]
Syntax: /msg ChanServ SOP #channel CLEAR

Maintains the SOP (SuperOP) list for a channel. The SOP list gives users all rights given by the AOP list, and adds those needed to use the AutoKick and the BadWords lists, to send and read channel memos, and so on.

The SOP ADD command adds the given nickname to the SOP list.

The SOP DEL command removes the given nick from the SOP list. If a list of entry numbers is given, those entries are deleted. (See the example for LIST below.)

The SOP LIST command displays the SOP list. If a wildcard mask is given, only those entries matching the mask are displayed. If a list of entry numbers is given, only those entries are shown; for example:

/msg ChanServ SOP #channel LIST 2-5,7-9
Lists AOP entries numbered 2 through 5 and 7 through 9

The SOP CLEAR command clears all entries of the SOP list.

The SOP ADD, SOP DEL and SOP CLEAR commands are limited to the channel founder. However, any user on the AOP list may use the SOP LIST command.

This command may have been disabled for your channel, and in that case you need to use the access list. See /msg ChanServ HELP ACCESS for information about the access list, and /msg ChanServ HELP SET XOP to know how to toggle between the access list and XOP list systems.

VOP

Syntax: /msg ChanServ VOP #channel ADD nickname
Syntax: /msg ChanServ VOP #channel DEL {nickname | entry-num | list}
Syntax: /msg ChanServ VOP #channel LIST [mask | list]
Syntax: /msg ChanServ VOP #channel CLEAR

Maintains the VOP (VOicePeople) list for a channel. The VOP list allows users to be auto-voiced and to voice themselves if they aren't.

The VOP ADD command adds the given nickname to the VOP list.

The VOP DEL command removes the given nick from the VOP list. If a list of entry numbers is given, those entries are deleted. (See the example for LIST below.)

The VOP LIST command displays the VOP list. If a wildcard mask is given, only those entries matching the mask are displayed. If a list of entry numbers is given, only those entries are shown; for example:

/msg ChanServ VOP #channel LIST 2-5,7-9
Lists VOP entries numbered 2 through 5 and 7 through 9.

The VOP CLEAR command clears all entries of the VOP list.

The VOP ADD, VOP DEL and VOP LIST commands are limited to AOPs or above, while the VOP CLEAR command can only be used by the channel founder.

This command may have been disabled for your channel, and in that case you need to use the access list. See /msg ChanServ HELP ACCESS for information about the access list, and /msg ChanServ HELP SET XOP to know how to toggle between the access list and XOP list systems.

ACCESS

Syntax: /msg ChanServ ACCESS #channel ADD nickname level
Syntax: /msg ChanServ ACCESS #channel DEL {nickname | entry-num | list}
Syntax: /msg ChanServ ACCESS #channel LIST [mask | list]
Syntax: /msg ChanServ ACCESS #channel CLEAR

Maintains the access list for a channel. The access list specifies which users are allowed chanop status or access to %S commands on the channel. Different user levels allow for access to different subsets of privileges; /msg ChanServ HELP ACCESS LEVELS for more specific information. Any nick not on the access list has a user level of 0.

The ACCESS ADD command adds the given nickname to the access list with the given user level; if the nick is already present on the list, its access level is changed to the level specified in the command. The level specified must be less than that of the user giving the command, and if the nickname is already on the access list, the current access level of that nick must be less than the access level of the user giving the command.

The ACCESS DEL command removes the given nick from the access list. If a list of entry numbers is given, those entries are deleted. (See the example for LIST below.)

The ACCESS LIST command displays the access list. If a wildcard mask is given, only those entries matching the mask are displayed. If a list of entry numbers is given, only those entries are shown; for example:

/msg ChanServ ACCESS #channel LIST 2-5,7-9
Lists access entries numbered 2 through 5 and 7 through 9

The ACCESS CLEAR command clears all entries of the access list.

ACCESS LEVELS

User access levels

By default, the following access levels are defined:

Founder Full access to ChanServ functions; automatic opping upon entering channel. Note that only one person may have founder status (it cannot be given using the ACCESS command).
10 Access to AKICK AKICK command; automatic opping.
  5 Automatic opping.
  3 Automatic voicing.
  0 No special privileges; can be opped by other ops (unless SECUREOPS is set).
<0 May not be opped.

These levels may be changed, or new ones added, using the LEVELS command; type /msg ChanServ HELP LEVELS for information.

AKICK

Syntax: /msg ChanServ AKICK #channel ADD mask [reason]
Syntax: /msg ChanServ AKICK #channel STICK mask
Syntax: /msg ChanServ AKICK #channel UNSTICK mask
Syntax: /msg ChanServ AKICK #channel DEL mask
Syntax: /msg ChanServ AKICK #channel LIST [mask]
Syntax: /msg ChanServ AKICK #channel VIEW [mask]
Syntax: /msg ChanServ AKICK #channel ENFORCE
Syntax: /msg ChanServ AKICK #channel CLEAR

Maintains the AutoKick list for a channel. If a user on the AutoKick list attempts to join the channel, ChanServ will ban that user from the channel, then kick the user.

The AKICK ADD command adds the given nick or usermask to the AutoKick list. If a reason is given with the command, that reason will be used when the user is kicked; if not, the default reason is "You have been banned from the channel".

The AKICK STICK command permanently bans the given mask on the channel. If someone tries to remove the ban, ChanServ will automatically set it again. You can't use it for registered nicks.

The AKICK UNSTICK command cancels the effect of the AKICK STICK command, so you'll be able to unset the ban again on the channel.

The AKICK DEL command removes the given nick or mask from the AutoKick list. It does not, however, remove any bans placed by an AutoKick; those must be removed manually.

The AKICK LIST command displays the AutoKick list, or optionally only those AutoKick entries which match the given mask.

The AKICK VIEW command is a more verbose version of AKICK LIST command.

The AKICK ENFORCE command causes ChanServ dto enforce the current AKICK list by removing those users who match an AKICK mask.

The AKICK CLEAR command clears all entries of the akick list.

LEVELS

Syntax: /msg ChanServ LEVELS #channel SET type level
Syntax: /msg ChanServ LEVELS #channel {DIS | DISABLE} type
Syntax: /msg ChanServ LEVELS #channel LIST
Syntax: /msg ChanServ LEVELS #channel RESET

The LEVELS command allows fine control over the meaning of the numeric access levels used for channels. With this command, you can define the access level required for most of ChanServ's functions. (The SET FOUNDER and SET PASSWORD commands, as well as this command, are always restricted to the channel founder.)

LEVELS SET allows the access level for a function or group of functions to be changed.

LEVELS DISABLE (or DIS for short) disables an automatic feature or disallows access to a function by anyone other than the channel founder.

LEVELS LIST shows the current levels for each function or group of functions.

LEVELS RESET resets the levels to the default levels of a newly-created channel (see /msg ChanServ HELP ACCESS LEVELS).

For a list of the features and functions whose levels can be set, see /msg ChanServ HELP LEVELS DESC.

LEVELS DESC

The following feature/function names are understood. Note that the levels for AUTODEOP and NOJOINare maximum levels, while all others are minimum levels

AUTODEOP - Channel operator status disallowed
AUTOHALFOP - Automatic mode halfop (+h)
AUTOOP - Automatic channel operator status (+o)
AUTOPROTECT - Automatic channel protection status (+a)
AUTOVOICE - Automatic mode voice (+v)
NOJOIN - Not allowed to join channel if RESTRICTED
SIGNKICK - No signed kick when SIGNKICK LEVEL is used
ACC-LIST - Allowed to view the access list
ACC-CHANGE - Allowed to modify the access list
AKICK - Allowed to use AKICK command
SET - Allowed to use SET command (not FOUNDER/PASSWORD)
BAN - Allowed to use BAN command
BANME - Allowed to ban him/herself
CLEAR - Allowed to use CLEAR command
GETKEY - Allowed to use GETKEY command
HALFOP - Allowed to use HALFOP/DEHALFOP commands
HALFOPME - Allowed to (de)halfop him/herself
INFO - Allowed to use INFO command with ALL option
KICK - Allowed to use KICK command
KICKME - Allowed to kick him/herself
INVITE - Allowed to use INVITE command
OPDEOP - Allowed to use OP/DEOP commands
OPDEOPME - Allowed to (de)op him/herself
PROTECT - Allowed to use PROTECT/DEPROTECT commands
PROTECTME - Allowed to (de)protect him/herself
TOPIC - Allowed to use TOPIC command
UNBAN - Allowed to use UNBAN command
VOICE - Allowed to use VOICE/DEVOICE commands
VOICEME - Allowed to (de)voice him/herself
MEMO - Allowed to list/read channel memos
ASSIGN - Allowed to assign/unassign a bot
BADWORDS - Allowed to use BADWORDS command
FANTASIA - Allowed to use fantaisist commands
GREET - Greet message displayed
NOKICK - Never kicked by the bot's kickers
SAY - Allowed to use SAY and ACT commands

INFO

Syntax: /msg ChanServ INFO #channel [ALL]

Lists information about the named registered channel, including its founder, time of registration, last time used, description, and mode lock, if any. If ALL is specified, the entry message and successor will also be displayed.

By default, the ALL option is limited to those with founder access on the channel.

LIST

Syntax: /msg ChanServ LIST pattern

Lists all registered channels matching the given pattern. (Channels with the PRIVATE option set are not listed.)

OP

Syntax: /msg ChanServ OP [#channel [nickname]]

Ops a selected nick on a channel. If nick is not given, it will op you. If channel and nick are not given, it will op you on all channels you're on, provided you have the rights to.

By default, limited to AOPs or those with level 5 access and above on the channel.

DEOP

Syntax: /msg ChanServ DEOP [#channel [nickname]]

Deops a selected nick on a channel. If nick is not given, it will deop you. If channel and nick are not given, it will deop you on all channels you're on, provided you have the rights to.

By default, limited to AOPs or those with level 5 access and above on the channel.

VOICE

Syntax: /msg ChanServ VOICE [#channel [nickname]]

Voices a selected nick on a channel. If nick is not given, it will voice you. If channel and nick are not given, it will voice you on all channels you're on, provided you have the rights to.

By default, limited to AOPs or those with level 5 access and above on the channel, or to VOPs or those with level 3 and above for self voicing.

DEVOICE

Syntax: /msg ChanServ DEVOICE [#channel [nickname]]

Devoices a selected nick on a channel. If nick is not given, it will devoice you. If channel and nick are not given, it will devoice you on all channels you're on, provided you have the rights to.

By default, limited to AOPs or those with level 5 access and above on the channel, or to VOPs or those with level 3 and above for self devoicing.

HALFOP

Syntax: /msg ChanServ HALFOP [#channel [nickname]]

Halfops a selected nick on a channel. If nick is not given, it will halfop you. If channel and nick are not given, it will halfop you on all channels you're on, provided you have the rights to.

By default, limited to AOPs and those with level 5 access and above on the channel, or to HOPs or those with level 4 and above for self halfopping.

DEHALFOP

Syntax: /msg ChanServ DEHALFOP [#channel [nickname]]

Dehalfops a selected nick on a channel. If nick is not given, it will dehalfop you. If channel and nick are not given, it will dehalfop you on all channels you're on, provided you have the rights to.

By default, limited to AOPs and those with level 5 access and above on the channel, or to HOPs or those with level 4 and above for self dehalfopping.

PROTECT

Syntax: /msg ChanServ PROTECT [#channel [nickname]]

Protects a selected nick on a channel. If nick is not given, it will protect you. If channel and nick are not given, it will protect you on all channels you're on, provided you have the rights to.

By default, limited to the founder, or to SOPs or those with level 10 and above on the channel for self protecting.

DEPROTECT

Syntax: /msg ChanServ DEPROTECT [#channel [nickname]]

Deprotects a selected nick on a channel. If nick is not given, it will deprotect you. If channel and nick are not given, it will deprotect you on all channels you're on, provided you have the rights to.

By default, limited to the founder, or to SOPs or those with level 10 and above on the channel for self deprotecting.

OWNER

Syntax: /msg ChanServ OWNER [#channel]

Gives you owner status on channel. If channel is not given, it will give you owner status on all channels you're on, provided you have the rights to.

Limited to those with founder access on the channel.

DEOWNER

Syntax: /msg ChanServ DEOWNER [#channel]

Removes your owner status on channel. If channel is not given, it will remove your owner status on all channels you're on, provided you have the rights to.

Limited to those with founder access on the channel

INVITE

Syntax: /msg ChanServ INVITE #channel

Tells ChanServ to invite you into the given channel.

By default, limited to AOPs or those with level 5 and above on the channel.

UNBAN

Syntax: /msg ChanServ UNBAN #channel

Tells ChanServ to remove all bans preventing you from entering the given channel.

By default, limited to AOPs or those with level 5 and above on the channel.

KICK

Syntax: /msg ChanServ KICK [#channel [nickname [reason]]]

Kicks a selected nick on a channel. If nick is not given, it will kick you. If channel and nick are not given, it will kick you on all channels you're on, provided you have the rights to.

By default, limited to AOPs or those with level 5 and above on the channel.

BAN

Syntax: /msg ChanServ BAN [#channel [nickname [reason]]]

Bans a selected nick on a channel. If nick is not given, it will ban you. If channel and nick are not given, it will ban you on all channels you're on, provided you have the rights to.

By default, limited to AOPs or those with level 5 and above on the channel.

TOPIC

Syntax: /msg ChanServ TOPIC #channel [topic]

Causes ChanServ to set the channel topic to the one specified. If topic is not given, then an empty topic is set. This command is most useful in conjunction with SET TOPICLOCK. See /msg ChanServ HELP SET TOPICLOCK for more information.

By default, limited to those with founder access on the channel.

CLEAR

Syntax: /msg ChanServ CLEAR #channel what

Tells ChanServ to clear certain settings on a channel. What can be any of the following:

MODES - Resets all modes on the channel (i.e. clears modes i,k,l,m,n,p,s,t).
BANS - Clears all bans on the channel.
EXCEPTS - Clears all excepts on the channel.
OPS - Removes channel-operator status (mode +o) from all channel operators.
VOICES - Removes "voice" status (mode +v) from anyone with that mode set.
USERS - Removes (kicks) all users from the channel.

By default, limited to those with founder access on the channel.

GETKEY

Syntax: /msg ChanServ GETKEY #channel

Returns the key of the given channel. This is a command mainly intended to be used by bots and/or scripts, so the output is in the following way:

KEY #channel key
Key is "NO KEY" if no key is set

SENDPASS

Syntax: /msg ChanServ SENDPASS #channel

Send the password of the given channel to the e-mail address set in the founder's nickname record. This command is really useful to deal with lost passwords.

Limited to IRC operators on Chat4all. Ask one of the IRCops (in channel #help).



© 2000 - 2006 Chat4All.org